1650cc FIC Mitsubishi DSM or EVO 8/9 Fuel Injector Clinic Injector Set (High-Z)

  • $914.00
Qty:  
OR
  • Shipping Policy

    World Wide Shipping Available

  • Payment methods

    Paypal Account Not Required for Checkout

    Paypal-all-credit-cards_mpji7j.png


Mitsubishi DSM/Evo 8/9 Fuel Injector Clinic Injector Set: 4 x 1650cc Saturated / High Impedance Ball & Seat Injectors. Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. Plug &Play fit to OEM harness. Resistor pack removal recommended.


Fuel Injector Clinic’s 1650cc/min high impedance injector is the largest high impedance injector compatible with all race fuels and has excellent idle performance in street driven cars while still providing enough fuel to support higher horsepower output on both E85 and gasoline.


The 1650cc high impedance injector can be used with any fuel type based on the stainless alloy valve construction. It is compatible with pump gasoline, E85, Q16, VP Import, FTW and other MTBE oxygenated race fuels!


This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.


Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 120ºF (49°C) fuel temperature using 93 Octane, 10% E pump gasoline.


Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.


Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.


Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty


This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.


HP Rating

Cylinder Quantity4
ImpedanceHigh-Z
WHP on Gas at 43.5psi 90%DC Turbo753
WHP on Gas at 58psi 90%DC Turbo869.55
WHP on E85 at 43.5psi 90%DC Turbo579
WHP on E85 at 58psi 90%DC Turbo669
WHP on Gas at 43.5psi 90%DC NA903
WHP on Gas at 58psi 90%DC NA1043
WHP on E85 at 43.5psi 90%DC NA695
Fuel Pressure (psi)43.5
Engine aspiration


    • Weight
      3 lbs
    • SKU
      S126-1650H
  • Resistor Pack Delete Plug:
    Resistor Pack Delete Plug, No Resistor Pack Delete Plug

AF Shipping Policy

DOMESTIC SHIPPING (Orders within the USA)

All orders are shipped using UPS, FEDEX, or USPS using their Current Shipping Rates and includes Insurance up to $999 for Manifold orders using UPS/FEDEX and $100 for USPS Flat Rate. Please contact us if you need additional Shipping Insurance before ordering.

USPS (United States Postal Service)

Selecting the USPS 3-5 day express option is for Domestic Customers ordering small sized products that would fit in a Small/Medium/Large Flat Rate Box. If you are ordering from a country OUTSIDE THE USA, additional Fees Could Apply from selecting this option.

INTERNATIONAL SHIPMENTS:

We do offer world wide shipping, Via UPS, DHL, or USPS. However, our website is not currently configured to accurately quote international shipments. Please contact us Prior to Ordering for an accurate quote if you are from outside the USA.

CUSTOMS, DUTIES, & IMPORT FEES:

Customers are responsible for all Customs, Duties, and Import Fees associated with international shipments between you and your Local or Federal Government. We will NOT falsely lower the Declared Value to help avoid or lower your Import Fees

CUSTOMERS SHIPPING ITEMS TO ARCHER FAB

Customers shipping items to Archer Fab that are needed for the Fabrication process (Turbocharger, or Turbine housing) will be charged the Return Shipping, additional to the amount originally paid in the invoice, unless otherwise specified or included.



We accept the following payment methods:

AF Consumer Terms & Conditions / Warranty Info
By purchasing from Archer fabrications LLC, you the consumer Understand and Agree to the following:
• All Archer fabrications, LLC. Products are intended for off road/track use only, and are recommended to be installed by a professional.
• All Archer Fabrications, LLC. Hand Made, Welded, & Fabricated Parts are Final sale (no refunds); Including but not necessarily limited to: Turbo manifolds, exhaust systems, waste gate dump tubes, O2 housings etc... 

•Returns: 

It is SOLELY at the discretion of Archer Fabrications, LLC.  to Approve or deny any AF welded product returns. Any and all approved returns will be subject to a 50% Restocking fee based off the total invoice

•All Third party products that are Returned/Refunded will be subject to the manufacturers return/exchange policy and a 25% Restocking fee.


• All Archer Fabrications, LLC Turbo Manifolds will include a LIMITED 3 YEAR WARRANTY Against welding related defects to the original purchase only, from the date purchased. Please contact us if you have any issues with your product and we will do our best to make it right.

• The limited warranty does not cover damage you may have caused & related or due to the following:

•User neglect, improper installation, damage related to a heavy Waste gate dump tube, damage due to vibratory contact from other parts, Damage caused from "heat wrapping".


Archer Fabrications, LLC. Will not be held liable for any damage that could occur to the related and moving parts associated with a turbo system, such as; The Engine & The Turbocharger, or damage to the vehicle itself, at anytime.


Archer Fabrications, LLC. Reserves the right to change or update the Terms and conditions / Warranty Info at any time.