650cc FIC Mitsubishi DSM or EVO 8/9 Fuel Injector Clinic Injector Set (High-Z)
-
Shipping Policy
World Wide Shipping Available
-
Payment methods
Paypal Account Not Required for Checkout
Mitsubishi DSM/Evo Fuel Injector Clinic Injector Set: 4x650cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Requires pigtails PGT USC4 or Plug &Play adaptors PADPUtoJ4. Resistor pack removal recommended.
Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.
Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.
This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicles OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
HP Rating
Cylinder Quantity4
ImpedanceHigh-Z
WHP on Gas at 43.5psi 90%DC Turbo316
WHP on Gas at 58psi 90%DC Turbo364.65
WHP on E85 at 43.5psi 90%DC Turbo243
WHP on E85 at 58psi 90%DC Turbo281
WHP on Gas at 43.5psi 90%DC NA379
WHP on Gas at 58psi 90%DC NA438
WHP on E85 at 43.5psi 90%DC NA291
Fuel Pressure (psi)43.5
Engine aspirationturbocharged
Adaptors
Plug-N-Play AdapterPADPUtoJ4
-
Resistor Pack Delete Plug:Resistor Pack Delete Plug, No Resistor Pack Delete Plug
-
Plug & Play AdapterSolder In Pigtails, Plug & Play Adapter
AF Shipping Policy
DOMESTIC SHIPPING (Orders within the USA)
All orders are shipped using UPS, FEDEX, or USPS using their Current Shipping Rates and includes Insurance up to $999 for Manifold orders using UPS/FEDEX and $100 for USPS Flat Rate. Please contact us if you need additional Shipping Insurance before ordering.
USPS (United States Postal Service)
Selecting the USPS 3-5 day express option is for Domestic Customers ordering small sized products that would fit in a Small/Medium/Large Flat Rate Box. If you are ordering from a country OUTSIDE THE USA, additional Fees Could Apply from selecting this option.
INTERNATIONAL SHIPMENTS:
We do offer world wide shipping, Via UPS, DHL, or USPS. However, our website is not currently configured to accurately quote international shipments. Please contact us Prior to Ordering for an accurate quote if you are from outside the USA.
CUSTOMS, DUTIES, & IMPORT FEES:
Customers are responsible for all Customs, Duties, and Import Fees associated with international shipments between you and your Local or Federal Government. We will NOT falsely lower the Declared Value to help avoid or lower your Import Fees
CUSTOMERS SHIPPING ITEMS TO ARCHER FAB
Customers shipping items to Archer Fab that are needed for the Fabrication process (Turbocharger, or Turbine housing) will be charged the Return Shipping, additional to the amount originally paid in the invoice, unless otherwise specified or included.
AF Consumer Terms & Conditions / Warranty Info
By purchasing from Archer fabrications LLC, you the consumer Understand and Agree to the following:
• All Archer fabrications, LLC. Products are intended for off road/track use only, and are recommended to be installed by a professional.
• All Archer Fabrications, LLC. Hand Made, Welded, & Fabricated Parts are Final sale (no refunds); Including but not necessarily limited to: Turbo manifolds, exhaust systems, waste gate dump tubes, O2 housings etc...
•Returns:
It is SOLELY at the discretion of Archer Fabrications, LLC. to Approve or deny any AF welded product returns. Any and all approved returns will be subject to a 50% Restocking fee based off the total invoice
•All Third party products that are Returned/Refunded will be subject to the manufacturers return/exchange policy and a 25% Restocking fee.
• All Archer Fabrications, LLC Turbo Manifolds will include a LIMITED 3 YEAR WARRANTY Against welding related defects to the original purchase only, from the date purchased. Please contact us if you have any issues with your product and we will do our best to make it right.
• The limited warranty does not cover damage you may have caused & related or due to the following:
•User neglect, improper installation, damage related to a heavy Waste gate dump tube, damage due to vibratory contact from other parts, Damage caused from "heat wrapping".
Archer Fabrications, LLC. Will not be held liable for any damage that could occur to the related and moving parts associated with a turbo system, such as; The Engine & The Turbocharger, or damage to the vehicle itself, at anytime.
Archer Fabrications, LLC. Reserves the right to change or update the Terms and conditions / Warranty Info at any time.