AF Evo 8/9 Aluminum Trunk Panel
The Wait is over!
New From Archer Fabrications the first ever on the market AF CT9A EVO TRUNK PLATE! (Evo 7 through 9)
This piece was designed to replace your broken or missing cardboard spare tire cover using OEM mounting!
Allows the removal of the spare tire and jack for weight reduction, while not loosing the functionality of the trunk floor
Easy installation requires removal of nothing but the rear trunk latch plastic for installation
Aluminum Weight: 9.6 lbs
**not recommended to mount a fuel cell to, but ideal to cover one**
**please make sure your trunk has all the appropriate mounting locations in refrence to the picture above before purchase, if you are missing the top right threaded holes in your trunk for what ever reason (seems to be common for the early 2003 Evo 8), you will have to drill a new hole and add an extra Nut sert to the top right corner of the AF Trunk Panel and trunk floor pan.**
-
Shipping Policy
World Wide Shipping Available
-
Payment methods
Paypal Account Not Required for Checkout
Optional Hardware kit includes:
X3 m6x1.00 25mm machine head bolts with washers (1/8" Hex key)
X2 M10x1.25 25mm Bolts with large fender washers (for large oem bolt holes usually covered by a black sticker, 17mm Socket)
X2 M10x1/8" Thick Rubber washers (Place between trunk floor and AF panel for sound dampening)
x3 M6x1/8" Thick Rubber Washers (Place between trunk floor and AF panel for sound dampening)
x2 M6 x1/2" Nylon Spacers (for sunken in bolt holes)
Note:
The AF Evo 7-9 trunk plate uses 4 oem bolt holes in the trunk, which covers 3 of the 4 corners. We have added an extra hole on the top left side of the panel for an OPTIONAL nut-sert mount (not included). It is not required, but if you choose to install a nut-sert yourself and use this extra hole, it will help give more distributed support and sound dampening.
Tip:
***we of course recommend professional installation, but if you decide to drill on your own, Archer Fabrications is not responsible for any damages you do to your own vehicle.***
with that said: If drilling the hole for the M6 Nut-sert into your trunk floor, fully bolt down the panel to mark your drill point with a sharpie and use a center punch so your drill does not slip, remove Panel and commence drilling, we recommend using a step drill bit as they work quickly, and are shallow (please note there is an EVAP line next to where the spare tire well dips down under the car make sure to take care when drilling) once the hole is drilled, use a Riv-Nut / Nut-sert river tool (can be found on amazon) to install the threaded piece for your 4th mounting hole.
AF Shipping Policy
DOMESTIC SHIPPING (Orders within the USA)
All orders are shipped using UPS, FEDEX, or USPS using their Current Shipping Rates and includes Insurance up to $999 for Manifold orders using UPS/FEDEX and $100 for USPS Flat Rate. Please contact us if you need additional Shipping Insurance before ordering.
USPS (United States Postal Service)
Selecting the USPS 3-5 day express option is for Domestic Customers ordering small sized products that would fit in a Small/Medium/Large Flat Rate Box. If you are ordering from a country OUTSIDE THE USA, additional Fees Could Apply from selecting this option.
INTERNATIONAL SHIPMENTS:
We do offer world wide shipping, Via UPS, DHL, or USPS. However, our website is not currently configured to accurately quote international shipments. Please contact us Prior to Ordering for an accurate quote if you are from outside the USA.
CUSTOMS, DUTIES, & IMPORT FEES:
Customers are responsible for all Customs, Duties, and Import Fees associated with international shipments between you and your Local or Federal Government. We will NOT falsely lower the Declared Value to help avoid or lower your Import Fees
CUSTOMERS SHIPPING ITEMS TO ARCHER FAB
Customers shipping items to Archer Fab that are needed for the Fabrication process (Turbocharger, or Turbine housing) will be charged the Return Shipping, additional to the amount originally paid in the invoice, unless otherwise specified or included.
AF Consumer Terms & Conditions / Warranty Info
By purchasing from Archer fabrications LLC, you the consumer Understand and Agree to the following:
• All Archer fabrications, LLC. Products are intended for off road/track use only, and are recommended to be installed by a professional.
• All Archer Fabrications, LLC. Hand Made, Welded, & Fabricated Parts are Final sale (no refunds); Including but not necessarily limited to: Turbo manifolds, exhaust systems, waste gate dump tubes, O2 housings etc...
•Returns:
It is SOLELY at the discretion of Archer Fabrications, LLC. to Approve or deny any AF welded product returns. Any and all approved returns will be subject to a 50% Restocking fee based off the total invoice
•All Third party products that are Returned/Refunded will be subject to the manufacturers return/exchange policy and a 25% Restocking fee.
• All Archer Fabrications, LLC Turbo Manifolds will include a LIMITED 3 YEAR WARRANTY Against welding related defects to the original purchase only, from the date purchased. Please contact us if you have any issues with your product and we will do our best to make it right.
• The limited warranty does not cover damage you may have caused & related or due to the following:
•User neglect, improper installation, damage related to a heavy Waste gate dump tube, damage due to vibratory contact from other parts, Damage caused from "heat wrapping".
Archer Fabrications, LLC. Will not be held liable for any damage that could occur to the related and moving parts associated with a turbo system, such as; The Engine & The Turbocharger, or damage to the vehicle itself, at anytime.
Archer Fabrications, LLC. Reserves the right to change or update the Terms and conditions / Warranty Info at any time.
