Previous image
Archer Fab 2021+ A90/A91 Toyota GR Supra MK5 6 port BILLET Series Twinscroll T4 Top Mount Turbo Manifold/Hot parts
Next image
Zoom image

Archer Fab 2021+ A90/A91 Toyota GR Supra MK5 6 port BILLET Series Twinscroll T4 Top Mount Turbo Manifold/Hot parts

  • $3599.99
Qty:  
OR

Archer Fab in collaboration with Harrison Performance are pleased to bring you the A90/A91 Top mount Manifold! 

Fits Turbochargers as large as PTE 7675 T04HP Compressor cover turbos and anything smaller in T4 Divided Turbine housings (Twinscroll) 

Common Turbo Sizes for this kit include PTE 6870 and 7675. It will Directly fit PTE T04H and T04HP compressor cover Turbos


Hot parts kit designed around 6870 T04HP Turbocharger includes:

3.5" Stainless Steel VBand down pipe with x2 o2 sensor bungs and fit for OEM Slip fit exhaust placement. Comes with Vband Clamp to Turbo

x2 Stainless Steel VBand wastegate dump tubes Down firing In front of down pipe

Charge Piping for Precision T04HPS Compressor cover Turbo with 90° welded Elbow Only: 

3" Stainless or Titanium Alloy Charge Pipe Material options

Fit for EOS 4" Intake manifold or Stock intake manifold with Port Fuel injection Rail (spacer)

Fit for OEM Supra throttle body

Thick bead roll end for Coupler Fit to Turbo to keep the seal at high boost, Coupler and Clamps Included!

Sensor Bungs: OEM map sensor, OEM IAT sensor, x1 1/8 NPT Boost Sources come Standard, and optional 1/8 NPT methanol injection port by throttle body flange, and Nitrous Bung available as well.

Optional TiAL BOV flange for TiAL 50mm Q Blow Off Valve (requires BOV controller TurboSmart Part # TS-0304-1003, on the B58 engine sold separately)

Oil Fittings and lines not include

ALPHA LOCK CLAMPS ARE ONLY AVAILABLE FOR LOCAL CUSTOMERS WHO BRING THEIR CARS IN!


-Precision Tig Welded and Hand Built

-Fully back purged using the purest liquid argon (99.998% Purity) and state of the art purging tools

-Hand Built 304L 1.5" schedule 40 stainless (Large runners for extra flow)

-Billet Stainless CNC Merge Collector T4 Divided With Dual Wastegate ports

-1/2" Thick Billet CNC Stainless Headflange made with 3D port transition from head to runner

-Runner entries at the head flange are welded inside and out for utmost strength and ported smooth for optimal flow

-Flanges are welded using thick aluminum heat sinks to prevent warpage during welding

- Head Flange decked flat to ensure proper seal to the Cylinder Head

-3 year warranty against weld defects to the original purchaser from the date ordered


Additional Options:

Ceramic Coating with the latest technology heat dissipation coatings Available in Black only

TiAL MVR 44mm Wastegates

Waste gate dump Tubes for Tial 44mm MVR

Exhaust: Stainless Steel Down Pipe or Titanium Hood Exit with Tear Drop Tip

Turbo Blanket: Torque Solutions TS-TB-LT4 T4 Lava Turbo Blanket will protect surrounding plastic parts and body panels from radiant turbine housing heat.

Blow off Valve Controller Kit: Required in the A90/91 When using a blow off valve


Turbo 90* Elbow required to be welded to the compressor cover to work with our charge piping, if you are supplying your own turbo you can send us the compressor cover to have this service performed.

Adding A Turbocharger

if you need to also purchase a new turbocharger there are many options for you to choose from on the turbocharger tab on the main page of the webstore to add to your cart. OR select from the drop down Menu with this kit.

When Checking out, please specify in the Notes section which turbo you are using if not purchasing one with this kit, so we can be sure to use the correct Outlet flange for your Specific Turbo.


Installation Tips: 

Removal and Plugging of the OEM Turbo's Auxillary Water pump is required when using an air/oil cooled turbo, or relocation is required if using our charge piping.

Relocation of Positive Battery Terminal is required to stay well clear of the 3.5" Exhaust

Turbo Blanket Is recommended for the Turbine Housing

*Install Manifold First, tighten all bolts well and use the OEM hardware and Gasket

*install Wastegates loosely onto the manifold and clamp the dump tubes loosely to the wastegates this will allow you to pivot the Vbands to align the Tips properly before tightening them in their final position.

*Bolt on the Turbo, add supplied Coupler and clamps to Turbo's Compressor Elbow

*install Down pipe from under the car to the OEM slip fit or Similar Fitting Exhaust and then clamp vband to turbo.

*install 02 sensors

* install Sensors onto Charge piping, slide charge piping into the coupler on the turbo and loosely clamp.

*Bolt throttle body flange on the charge pipe to OEM throttle body


NOTE:

-All Archer Fabrications products are hand made to order and one of a kind, each manifold may have slight runner variations that differ from the picture.


-please check our lead times tab for current build/wait times

-Additional options could add additional wait time

Disclaimer: -ALL ARCHER FABRICATIONS PRODUCTS ARE INTENDED FOR OFF-ROAD, CLOSED RACE TRACK, AND SANCTIONED COMPETITION USE ONLY!

    • Weight
      35 lbs
    • SKU
      AF-Mk5-supra-TopmountT4D-6port
  • Turbine Flange:
    T4 Divided (Twinscroll)
  • Wastegate Flanges:
    Twin TiAL MVR 44mm
  • Hot parts:
    No Hot Parts, 3.5" Stainless VBand Down pipe and Down firing Dump Tubes, 3.5" Titanium VBand Mandrel bent Hood Exit Exhaust with tear drop Tip & Stainless Down firing Dump Tubes
  • Add Wastegates:
    No Wastegates, X2 TiAL 44mm MVR SILVER, X2 TiAL 44mm MVR BLACK, X2 TiAL 44mm MVR BLUE, X2 TiAL 44mm MVR RED, X2 TiAL 44mm MVR PURPLE
  • Add Turbo:
    No Turbo, (1100Hp) Precision GEN2 6870 Ballbearing Turbo .84 A/R T4 Divided T04HP W 3 5/8" VBand discharge, (1100Hp) Precision GEN2 6870 Ballbearing Turbo 1.00 A/R T4 Divided T04HP With 3 5/8" VBand Discharge, (1100Hp) Precision GEN2 6870 Ballbearing Turbo 1.15 A/R T4 Divided T04HP With 3 5/8" VBand Discharge, (1100Hp) Precision GEN2 6870 Ballbearing Turbo 1.32 A/R T4 Divided T04HP With 3 5/8" VBand Discharge, (900Hp) Precision GEN2 6466 Ballbearing Turbo .84 A/R T4 Divided T04HP W 3 5/8" VBand discharge, (900Hp) Precision GEN2 6466 Ballbearing Turbo 1.00 A/R T4 Divided T04HP With 3 5/8" VBand Discharge, (900Hp) Precision GEN2 6466Ballbearing Turbo 1.15 A/R T4 Divided T04HP With 3 5/8" VBand Discharge, (900Hp) Precision GEN2 6466 Ballbearing Turbo 1.32 A/R T4 Divided T04HP With 3 5/8" VBand Discharge
  • 3" Charge Piping:
    No Charge Piping, Stainless Steel Fit for Stock Intake Manifold & OEM Throttle Body, Stainless Steel For EOSpeed 4" Intake Manifold & OEM Throttle Body, Titanium Alloy Fit for Stock Intake Manifold W/ Port injection Rail & OEM Throttle Body, Titanium Alloy Fit for EOSpeed 4" Intake Manifold & OEM Throttle Body
  • Blow off valve flange on charge piping
    No, Yes (Stainless Steel), Yes (Titanium)
  • Add Blow off Valve:
    No Blow Off Valve, TiAL Q 50mm BOV SILVER, TiAL Q 50mm BOV BLACK, TiAL Q 50mm BOV BLUE, TiAL Q 50mm BOV RED, TiAL Q 50mm BOV PURPLE
  • Extra 1/8 NPT Bungs on Charge Pipe
    No, 1 Methanol Bung by Throttle Body (Stainless), 1 Nitrous Bung (Stainless), Both Stainless Methanol & Nitrous Bungs, 1 Titanium Methanol Bung by Throttle Body, 1 Titanium Nitrous Bung, Both Titanium Methanol & Nitrous bungs
  • Weld Elbow to Compressor Cover:
    No, Yes
  • High temp Ceramic coating
    No, Yes: Manifold only (Black), Yes: Manifold & Hot Parts (Black)
  • Blow off Valve Controller Kit:
    No, Turbosmart BOV Controller Module PT# TS-0304-1003
  • Thermal Turbo Blanket:
    No, Yes: Torque Solutions T4 Turbo Blanket (Lava) PT#TS-TB-LT4