Evo 9 UHF Green Ball Bearing Turbo Charger

  • $2799.00
Qty:  
OR
  • Shipping Policy

    World Wide Shipping Available

  • Payment methods

    Paypal Account Not Required for Checkout

    Paypal-all-credit-cards_mpji7j.png


The Evo 9 UHF Green is an all new product for 2020 that we are releasing early so that you can have the best performing bolt on turbo ever made for the Evo platform.


EVO 9 UHF Green

 

  • Compressor wheel - 73HTZ
  • Flow rating - 57LB per minute
  • CW Measurements - 52.6MM Inducer / 73MM Exducer
  • TW Measurements - 64MM Inducer / 57MM Exducer
  • Compressor Housing - 84MM Flow Advancement Port Cover
  • Turbine Housing - FP Stainless Steel or MHI 10.5
  • CHRA - Xona Rotor Dual Ceramic Ball Bearing
  • Oil Line - Stock Oil Feed Line Compatible


For this ground breaking new product we take a standard FP Green and replace the turbine wheel with our new XR57 UHF turbine wheel. This provides drastically reduced rotating mass and increased choke flow for even quicker response and less back pressure. In short, more power, earlier. Of course, this unit utilizes our Xona Ball Bearing CHRA for increased durability in situations where you might see low oil flow such as road racing or autocross applications.



Here is a note from Robert about the performance of this UHF Green on the race car shown in the video above-

"There are 2 dyno graphs of Kerns car.


One is the current FP Green UHF, the other is the same FP Green UHF laid on top of last years combination with a FPRed model.


Your first thought might be "holdup, that new Green spools up the same as that Red and doesnt make the same peak power"


Well, last season the engine was a built long rod 2.4 with 10.5:1 CR and that dyno graph is 22psi.  This season the engine is a stock 2.0 bottom end and the turbo comes on so fast that we are actually having to open the gate early to keep the torque below the failure level on the stock connecting rods!  So we have almost the same power and response this year with a stock engine and FPGreenUHF turbo as we did last year with a built long rod 2.4 with 10.5CR and a bigger turbocharger."


Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.

THIS PRODUCT IS FOR COMPETITION USE ONLY. ALL OTHER USES ARE CONTRARY TO FEDERAL LAW. IF YOU INTEND TO USE THIS PRODUCT FOR HIGHWAY OR NON-COMPETITION OFF-ROAD PURPOSES DO NOT PURCHASE OR INSTALL THIS PRODUCT. THIS PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA ON ANY TYPE OF EMISSION CONTROLLED VEHICLE.

    • Weight
      28 lbs
    • SKU
      2007020
  • Coat Turbine Housing:
    No, Yes
  • Turbine Housing
    MHI 10.5 OEM Turbine Housing Without Wastegate, FP SS Turbine Housing, MHI 10.5 OEM Turbine Housing Wit 18 PSI Actuator

AF Shipping Policy

DOMESTIC SHIPPING (Orders within the USA)

All orders are shipped using UPS, FEDEX, or USPS using their Current Shipping Rates and includes Insurance up to $999 for Manifold orders using UPS/FEDEX and $100 for USPS Flat Rate. Please contact us if you need additional Shipping Insurance before ordering.

USPS (United States Postal Service)

Selecting the USPS 3-5 day express option is for Domestic Customers ordering small sized products that would fit in a Small/Medium/Large Flat Rate Box. If you are ordering from a country OUTSIDE THE USA, additional Fees Could Apply from selecting this option.

INTERNATIONAL SHIPMENTS:

We do offer world wide shipping, Via UPS, DHL, or USPS. However, our website is not currently configured to accurately quote international shipments. Please contact us Prior to Ordering for an accurate quote if you are from outside the USA.

CUSTOMS, DUTIES, & IMPORT FEES:

Customers are responsible for all Customs, Duties, and Import Fees associated with international shipments between you and your Local or Federal Government. We will NOT falsely lower the Declared Value to help avoid or lower your Import Fees

CUSTOMERS SHIPPING ITEMS TO ARCHER FAB

Customers shipping items to Archer Fab that are needed for the Fabrication process (Turbocharger, or Turbine housing) will be charged the Return Shipping, additional to the amount originally paid in the invoice, unless otherwise specified or included.



We accept the following payment methods:

AF Consumer Terms & Conditions / Warranty Info
By purchasing from Archer fabrications LLC, you the consumer Understand and Agree to the following:
• All Archer fabrications, LLC. Products are intended for off road/track use only, and are recommended to be installed by a professional.
• All Archer Fabrications, LLC. Hand Made, Welded, & Fabricated Parts are Final sale (no refunds); Including but not necessarily limited to: Turbo manifolds, exhaust systems, waste gate dump tubes, O2 housings etc... 

•Returns: 

It is SOLELY at the discretion of Archer Fabrications, LLC.  to Approve or deny any AF welded product returns. Any and all approved returns will be subject to a 50% Restocking fee based off the total invoice

•All Third party products that are Returned/Refunded will be subject to the manufacturers return/exchange policy and a 25% Restocking fee.


• All Archer Fabrications, LLC Turbo Manifolds will include a LIMITED 3 YEAR WARRANTY Against welding related defects to the original purchase only, from the date purchased. Please contact us if you have any issues with your product and we will do our best to make it right.

• The limited warranty does not cover damage you may have caused & related or due to the following:

•User neglect, improper installation, damage related to a heavy Waste gate dump tube, damage due to vibratory contact from other parts, Damage caused from "heat wrapping".


Archer Fabrications, LLC. Will not be held liable for any damage that could occur to the related and moving parts associated with a turbo system, such as; The Engine & The Turbocharger, or damage to the vehicle itself, at anytime.


Archer Fabrications, LLC. Reserves the right to change or update the Terms and conditions / Warranty Info at any time.

Related products