Previous image
FP 68HTA for DSM
Next image
Zoom image

FP 68HTA for DSM

  • $974.00
  • Weight
    20 lbs
  • SKU


  • Compressor wheel - 68HTA
  • Flow rating - 51LB per minute
  • CW Measurements - 51.2MM Inducer / 68MM Exducer
  • TW Measurements - 60.8MM Inducer / 54MM Exducer
  • Compressor Housing - 16G TD05H (56mm)
  • Turbine Housing - FP 8CM
  • CHRA - FP Journal Bearing
  • Oil Line - Not Included

The FP 68HTA™ Turbocharger for DSM Flanged Vehicle out flows both the E316g and 18g wheels and allows for higher PR operation without increased compressor outlet temperatures like the existing 16g and 18g wheels. Mass flow is increased to a whopping 51lb/min which is several lb/min greater than either the E316g or the 18g wheels are capable. To maximize it's power potential this turbo comes standard with a 8CM turbine housing. 

This turbo requires that oil be fed off the filter housing which can be accomplished by purchasing our 1G Oil Supply Line.

Info on turbine housing coating.  

Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger we cannot guarantee a delivery date or ETA.

  • Compressor Housing:
    56MM Stock Appearing, 84MM Flow Advancement Port
  • Wastegate Option:
    Internal Wastegate, External off O2, External off Manifold
  • Turbine Housing Coating:
    No, Yes
  • Oil Line:
    No Oil Line, Yes Oil Line, Yes Oil Line AND Filter